Changes between Version 29 and Version 30 of WikiStart

Timestamp:

Jan 16, 2019, 6:11:37 PM (6 years ago)

Author:

oliver

Comment:

--

WikiStart

@@ -167 +167 @@
 
 ==== Incidents ====
+The Incidents view provides access an overview of aggregated Incidents and shows the
+locations of the Observations, outside of their normal range(s), that make up an Incident.
+
+At present, Incident Observation location correlation with AIS information (other nearby Vessels)
+is not available at Onboard installations.
 
 ===== Figure 4.1 Aggregated Incidents #fig4-1
@@ -189 +194 @@
 
 ===== Figure 5.1 - Observations View - Observation without Oil Pollution #fig5-1
-The annotated circles numbered from 1..11 can be clicked to jump to the details
+The annotated circles numbered from 1..8 can be clicked to jump to the details
 of each presented control.
 
@@ -263 +268 @@
 
 ==== Devices ====
-
+The Devices view is for monitoring Device health, gas refill operations and manual
+Device mode overrides.
+
+By default the a Device is configured to run in its ''Normal'' mode. Which will trigger
+the Device to take a measurement every ''N'' meters accordingly to the Device's GPS data.
+
+The length of ''N'' will depend on the length of the Observer to which a Device is mounted.
+
+When an Incident is detected the Device will automatically switch to ''Fast'' mode for
+30 seconds. If during that 30 seconds new Incident Observations are found the timer is reset.
+That is the Device will keep operating in ''Fast'' mode. If during the 30 second window
+no more Incident Observations are found, the Device will switch back to ''Normal'' mode.
+
+For search and Incident (e.g. oil spill area) detection, the Device can be switched
+manually to ''Fast'' mode.
 
 ===== Figure 6.1 Devices #fig6-1