Changes between Version 2 and Version 3 of LidarHttpServer

Timestamp:

Jul 18, 2016, 2:30:46 PM (9 years ago)

Author:

oliver

Comment:

--

LidarHttpServer

@@ -28 +28 @@
 === 2.3. Network Configuration
 You get the idea of what fields and network parameters can be altered on Figure 3.
-**You should manipulate these parameters only if you are confident what are you going to do!**
+'''You should manipulate these parameters only if you are confident what are you going to do! '''
 You may loose connection to the device if wrong parameters are entered.
 
@@ -48 +48 @@
   * Distance – sampling is performed in equal distances covered by vessel and calculated by position data from GPS.
   * Mixed – logical OR function decides if measuring interval or covered distance triggers next sample.
-  * Gas refill modes – These are covered in special Gas Refill Manual and need extra caution! **BE CAREFUL!**
+  * Gas refill modes – These are covered in special Gas Refill Manual and need extra caution! '''BE CAREFUL! '''
 
 “HLIF Lidar general settings” box combines several figures that present LIDAR
@@ -60 +60 @@
 “Detector settings” box shows optimal gate delay, width and gain set for your
 installation. They depend on distance, distance variation and signal level respectively.
-**Handle with care!**
+'''Handle with care! '''
 
 “Laser Settings” box includes controls for powering on/off laser separately from
@@ -85 +85 @@
 controls for manual intervention in gas refill procedures.
 
-**CAUTION! Do not attempt to gas refill or other gas manipulation prior to getting
+'''CAUTION! Do not attempt to gas refill or other gas manipulation prior to getting
 familiar with [wiki:LidarGasRefill Gas Refill Manual]. Severe damage may happen to
-LIDAR hardware.**
+LIDAR hardware'''.
 
 “Internal storage” box includes hyperlinks to plain text log and ini files.