Changes between Version 1 and Version 2 of DeploymentPreparation

Timestamp:

Oct 19, 2016, 10:15:44 AM (8 years ago)

Author:

indrek

Comment:

--

DeploymentPreparation

@@ -7 +7 @@
 == Introduction ==
 
-This guide is aimed to the the team responsible for deploying the Shipborn Lidar on a vessel 
+This guide is aimed to the the team responsible for deploying the Shipborne Lidar on a vessel 
 or a rig. It will specify the conditions about system placement that need to be met for
-optimal performance. Also, it will specify the information Ocean Visuals needs to prapare the
-fastenings.
+optimal performance. Also, it will specify the information Ocean Visuals needs to prepare the
+fastenings for the measurement device.
 
 == Deployment on a ship == 
+
+[[Image(Ship_top.png, 200px, right, top)]]
+
 
 The laser beam should be aimed at the point where the ship movement would not create foam.
@@ -19 +22 @@
 side, so the beam would hit water in front of the vessel.
 
-[[Image(Ship_top.png, 300px, right, top)]]
 
 The laser beam should not travel more than thirty meters before hitting the water. More than
@@ -33 +35 @@
 [[Image(Ship_front.png, 300px)]]
 
+Once the position has been decided please provide a drawing of the railing or
+other attachment point to Ocean Visuals. 
+
 == Deployment on a rig == 
 
@@ -38 +43 @@
 by ships or any other obsticle. The laser beam lenght limit is the same as with the deployment
 on a vessel and the change in length due to waves should be taken into account.
+Once the position has been decided please provide a drawing of the railing or
+other attachment point to Ocean Visuals.
 
 [[Image(Rig.png, 300px)]]